<?xml version="1.0" encoding="UTF-8"?><metadata xml:lang="en">
<Esri>
<CreaDate>20190705</CreaDate>
<CreaTime>05112700</CreaTime>
<ArcGISFormat>1.0</ArcGISFormat>
<SyncOnce>FALSE</SyncOnce>
<DataProperties>
<itemProps>
<itemName Sync="FALSE">FloodSwitz_Floodway</itemName>
<nativeExtBox>
<westBL Sync="TRUE">403539.062600</westBL>
<eastBL Sync="TRUE">692187.625100</eastBL>
<southBL Sync="TRUE">4180918.750000</southBL>
<northBL Sync="TRUE">4625481.094700</northBL>
<exTypeCode Sync="TRUE">1</exTypeCode>
</nativeExtBox>
<imsContentType Sync="TRUE">002</imsContentType>
</itemProps>
<coordRef>
<type Sync="TRUE">Projected</type>
<geogcsn Sync="TRUE">GCS_North_American_1983</geogcsn>
<csUnits Sync="TRUE">Linear Unit: Meter (1.000000)</csUnits>
<peXml Sync="TRUE">&lt;ProjectedCoordinateSystem xsi:type='typens:ProjectedCoordinateSystem' xmlns:xsi='http://www.w3.org/2001/XMLSchema-instance' xmlns:xs='http://www.w3.org/2001/XMLSchema' xmlns:typens='http://www.esri.com/schemas/ArcGIS/2.9.0'&gt;&lt;WKT&gt;PROJCS[&amp;quot;NAD_1983_UTM_Zone_16N&amp;quot;,GEOGCS[&amp;quot;GCS_North_American_1983&amp;quot;,DATUM[&amp;quot;D_North_American_1983&amp;quot;,SPHEROID[&amp;quot;GRS_1980&amp;quot;,6378137.0,298.257222101]],PRIMEM[&amp;quot;Greenwich&amp;quot;,0.0],UNIT[&amp;quot;Degree&amp;quot;,0.0174532925199433]],PROJECTION[&amp;quot;Transverse_Mercator&amp;quot;],PARAMETER[&amp;quot;False_Easting&amp;quot;,500000.0],PARAMETER[&amp;quot;False_Northing&amp;quot;,0.0],PARAMETER[&amp;quot;Central_Meridian&amp;quot;,-87.0],PARAMETER[&amp;quot;Scale_Factor&amp;quot;,0.9996],PARAMETER[&amp;quot;Latitude_Of_Origin&amp;quot;,0.0],UNIT[&amp;quot;Meter&amp;quot;,1.0],AUTHORITY[&amp;quot;EPSG&amp;quot;,26916]]&lt;/WKT&gt;&lt;XOrigin&gt;-5120900&lt;/XOrigin&gt;&lt;YOrigin&gt;-9998100&lt;/YOrigin&gt;&lt;XYScale&gt;10000&lt;/XYScale&gt;&lt;ZOrigin&gt;0&lt;/ZOrigin&gt;&lt;ZScale&gt;1&lt;/ZScale&gt;&lt;MOrigin&gt;0&lt;/MOrigin&gt;&lt;MScale&gt;1&lt;/MScale&gt;&lt;XYTolerance&gt;0.001&lt;/XYTolerance&gt;&lt;ZTolerance&gt;0.001&lt;/ZTolerance&gt;&lt;MTolerance&gt;0.001&lt;/MTolerance&gt;&lt;HighPrecision&gt;true&lt;/HighPrecision&gt;&lt;WKID&gt;26916&lt;/WKID&gt;&lt;LatestWKID&gt;26916&lt;/LatestWKID&gt;&lt;/ProjectedCoordinateSystem&gt;</peXml>
<projcsn Sync="TRUE">NAD_1983_UTM_Zone_16N</projcsn>
</coordRef>
</DataProperties>
<SyncDate>20221027</SyncDate>
<SyncTime>07240900</SyncTime>
<ModDate>20221027</ModDate>
<ModTime>07240900</ModTime>
<scaleRange>
<minScale>150000000</minScale>
<maxScale>5000</maxScale>
</scaleRange>
<ArcGISProfile>FGDC</ArcGISProfile>
<ArcGISstyle>FGDC CSDGM Metadata</ArcGISstyle>
</Esri>
<mdLang>
<languageCode value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</mdLang>
<mdChar>
<CharSetCd value="004"/>
</mdChar>
<mdHrLv>
<ScopeCd value="005"/>
</mdHrLv>
<mdContact>
<rpIndName>Kurt Babcock</rpIndName>
<rpOrgName>Indiana Department of Natural Resources Division of Water</rpOrgName>
<rpPosName>GIS Coordinator</rpPosName>
<rpCntInfo>
<cntPhone>
<voiceNum>317.234.1094</voiceNum>
</cntPhone>
</rpCntInfo>
<role>
<RoleCd value="007"/>
</role>
</mdContact>
<mdStanName>ArcGIS Metadata</mdStanName>
<mdStanVer>1.0</mdStanVer>
<distInfo>
<distributor>
<distorCont>
<rpOrgName>Indiana Department of Natural Resources/Division of Water</rpOrgName>
<rpCntInfo>
<cntPhone>
<voiceNum>317-232-4160</voiceNum>
</cntPhone>
<cntAddress addressType="both">
<delPoint>402 West Washington Street, Rm W264</delPoint>
<city>Indianapolis</city>
<adminArea>Indiana</adminArea>
<postCode>46204</postCode>
<country>US</country>
<eMailAdd>water_inquiry@dnr.IN.gov</eMailAdd>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="005"/>
</role>
</distorCont>
</distributor>
<distFormat>
<formatName Sync="TRUE">Enterprise Geodatabase Feature Class</formatName>
</distFormat>
</distInfo>
<dataIdInfo>
<idCitation>
<date>
<pubDate>2009-09-25T00:00:00</pubDate>
<reviseDate>2020-02-20T00:00:00</reviseDate>
</date>
<citRespParty>
<rpOrgName>Indiana Department of Natural Resources</rpOrgName>
<role>
<RoleCd value="010"/>
</role>
</citRespParty>
<citRespParty>
<rpOrgName>Indiana Department of Natural Resources</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<resTitle Sync="FALSE">FLOODHAZARD_DNR_WATER</resTitle>
<presForm>
<PresFormCd Sync="TRUE" value="005"/>
</presForm>
</idCitation>
<idAbs>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;This database is an interim version of the Digital Flood Insurance Rate Map (DFIRM) Database. It does not fully meet all DFIRM specifications as found in "Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Database". A fully compliant product is expected in 2005. Only data from the following counties are included in this dataset: Adams, Bartholomew, Benton, Blackford, Boone, Brown, Carrroll, Cass, Clark, Clay, Clinton, Crawford, Daviess, Dearborn, Decatur, Delaware, Dubois, Elkhart, Fayette, Floyd, Fountain, Franklin, Fulton, Gibson, Grant, Greene, Hancock, Harrison, Hendricks, Henry, Howard, Huntington, Jackson, Jasper, Jay, Jefferson, Jennings, Knox, Kosciusko, LaGrange, LaPorte, Lawrence, Madison, Marshall, Martin, Miami, Monroe, Montgomery, Morgan, Newton, Noble, Ohio, Orange, Owen, Parke, Perry, Pike, Porter, Posey, Pulaski, Putnam, Randolph, Ripley, Rush, Scott, Shelby, Spencer, Starke, Steuben, St. Joseph, Sullivan, Switzerland, Tippecanoe, Tipton, Unkon, Vermillion, Vigo, Wabash, Warren, Warrick, Washington, Wayne, Wells, White, Whitley. The DFIRM depicts flood risk information and supporting data used to develop the risk data. For flood insurance rating purposes, flood insurance zone designations are assigned to a community based on the results of the engineering analyses. &lt;/SPAN&gt;&lt;/P&gt;&lt;P&gt;&lt;SPAN&gt;The data are best symbolized using the “Unique values, many fields” option, and selecting the FLD_ZONE field and the ZONE_SUBTY field. To categorize using FLD_ZONE/ZONE_SUBTY:&lt;/SPAN&gt;&lt;/P&gt;&lt;UL&gt;&lt;LI&gt;&lt;P&gt;&lt;SPAN&gt;Floodways = AE/FLOODWAY; &lt;/SPAN&gt;&lt;/P&gt;&lt;/LI&gt;&lt;LI&gt;&lt;P&gt;&lt;SPAN&gt;1% Annual Chance Flood = A/ &amp;lt;Null&amp;gt;; AE/&amp;lt;Null&amp;gt;; AH/ &amp;lt;Null&amp;gt;;, and AO/ &amp;lt;Null&amp;gt;. &lt;/SPAN&gt;&lt;/P&gt;&lt;/LI&gt;&lt;LI&gt;&lt;P&gt;&lt;SPAN&gt;0.2% Annual Chance Flood Hazard = X/0.2 PCT ANNUAL CHANCE FLOOD HAZARD&lt;/SPAN&gt;&lt;/P&gt;&lt;/LI&gt;&lt;LI&gt;&lt;P&gt;&lt;SPAN&gt;0.2% Annual Chance, Protected by Levee = X/AREA WITH REDUCED FLOOD RISK DUE TO LEVEE.&lt;/SPAN&gt;&lt;/P&gt;&lt;/LI&gt;&lt;/UL&gt;&lt;P&gt;&lt;SPAN&gt;The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</idAbs>
<idPurp>The purpose of this interim product is to provide much of the same information as the paper FIRM while moving toward compliance with the specifications found in "Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Database". The FIRM is the basis for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). Insurance applications include enforcement of the mandatory purchase requirement of the Flood Disaster Protection Act, which "... requires the purchase of flood insurance by property owners who are being assisted by Federal programs or by Federally supervised, regulated or insured agencies or institutions in the acquisition or improvement of land facilities located or to be located in identified areas having special flood hazards," Section 2(b) (4) of the Flood Disaster Protection Act of 1973. In addition to the identification of Special Flood Hazard Areas (SFHAs), the risk zones shown on the FIRMs are the basis for the establishment of premium rates for flood coverage offered through the NFIP. The DFIRM Database presents the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The DFIRM database is a subset of the Digital FIS database that serves to archive the information collected during the FIS.</idPurp>
<idStatus>
<ProgCd value="007"/>
</idStatus>
<idPoC>
<rpIndName>Dave Knipe</rpIndName>
<rpOrgName>Indiana Department of Natural Resources/Division of Water</rpOrgName>
<rpPosName>Engineering Section Manager</rpPosName>
<rpCntInfo>
<cntPhone>
<voiceNum>317-232-4160</voiceNum>
<faxNum>317-233-4579</faxNum>
</cntPhone>
<cntAddress addressType="both">
<delPoint>402 W. Washington St. Rm. 264</delPoint>
<city>Indianapolis</city>
<adminArea>IN</adminArea>
<postCode>46204</postCode>
<country>US</country>
<eMailAdd>dknipe@dnr.in.gov</eMailAdd>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="007"/>
</role>
</idPoC>
<resMaint>
<maintFreq>
<MaintFreqCd value="010"/>
</maintFreq>
</resMaint>
<placeKeys>
<keyword>St. Joseph County</keyword>
<keyword>Monroe County</keyword>
<keyword>Orange County</keyword>
<keyword>Starke County</keyword>
<keyword>Tippecanoe County</keyword>
<keyword>Spencer County</keyword>
<keyword>Indiana</keyword>
<keyword>Porter County</keyword>
<keyword>Benton County</keyword>
<keyword>Putnam County</keyword>
<keyword>Posey County</keyword>
<keyword>Montgomery County</keyword>
<keyword>Kosciusko County</keyword>
<keyword>Jay County</keyword>
<keyword>Carroll County</keyword>
<keyword>Wabash County</keyword>
<keyword>Elkhart County</keyword>
<keyword>Grant County</keyword>
<keyword>Madison County</keyword>
<keyword>Clark County</keyword>
<keyword>Jasper County</keyword>
<keyword>Floyd County</keyword>
<keyword>Clinton County</keyword>
<keyword>Morgan County</keyword>
<keyword>Dubois County</keyword>
<keyword>Bartholomew County</keyword>
<keyword>Howard County</keyword>
<keyword>Parke County</keyword>
<keyword>Noble County</keyword>
<keyword>Decatur County</keyword>
<keyword>Dearborn County</keyword>
<keyword>Fulton County</keyword>
<keyword>Washington County</keyword>
<keyword>Marshall County</keyword>
<keyword>Owen County</keyword>
<keyword>Warren County</keyword>
<keyword>Pulaski County</keyword>
<keyword>Pike County</keyword>
<keyword>Blackford County</keyword>
<keyword>LaPorte County</keyword>
<keyword>Wayne County</keyword>
<keyword>Warrick County</keyword>
<keyword>Jennings County</keyword>
<keyword>Sullivan County</keyword>
<keyword>Scott County</keyword>
<keyword>Jefferson County</keyword>
<keyword>Switzerland County</keyword>
<keyword>Clay County</keyword>
<keyword>Hendricks County</keyword>
<keyword>Shelby County</keyword>
<keyword>Boone County</keyword>
<keyword>White County</keyword>
<keyword>Martin County</keyword>
<keyword>Cass County</keyword>
<keyword>Fayette County</keyword>
<keyword>Huntington County</keyword>
<keyword>Tipton County</keyword>
<keyword>Vigo County</keyword>
<keyword>Harrison County</keyword>
<keyword>Whitley County</keyword>
<keyword>Newton County</keyword>
<keyword>Brown County</keyword>
<keyword>Rush County</keyword>
<keyword>Gibson County</keyword>
<keyword>Miami County</keyword>
<keyword>Ripley County</keyword>
<keyword>Jackson County</keyword>
<keyword>USA</keyword>
<keyword>Steuben County</keyword>
<keyword>Henry County</keyword>
<keyword>Wells County</keyword>
<keyword>LaGrange County</keyword>
<keyword>Lawrence County</keyword>
<keyword>Adams County</keyword>
<keyword>Hancock County</keyword>
<keyword>Randolph County</keyword>
<keyword>Greene County</keyword>
<keyword>Ohio County</keyword>
<keyword>Vermillion County</keyword>
<keyword>Delaware County</keyword>
<keyword>Daviess County</keyword>
<keyword>Crawford County</keyword>
<keyword>Fountain County</keyword>
<keyword>Union County</keyword>
<keyword>Knox County</keyword>
<keyword>Perry County</keyword>
<keyword>Franklin County</keyword>
</placeKeys>
<themeKeys>
<keyword>FIRM</keyword>
<keyword>Digital Flood Insurance Rate Map</keyword>
<keyword>FEMA Flood Hazard Zone</keyword>
<keyword>NFIP</keyword>
<keyword>Special Flood Hazard Area</keyword>
<keyword>CBRS</keyword>
<keyword>Flood Insurance Rate Map</keyword>
<keyword>Riverine Flooding</keyword>
<keyword>inlandWaters</keyword>
<keyword>DFIRM</keyword>
<keyword>Coastal Barrier Resources System</keyword>
<keyword>SFHA</keyword>
<keyword>Coastal Flooding</keyword>
<keyword>Floodway</keyword>
<keyword>DFIRM Database</keyword>
</themeKeys>
<searchKeys>
<keyword>St. Joseph County</keyword>
<keyword>FIRM</keyword>
<keyword>Monroe County</keyword>
<keyword>Orange County</keyword>
<keyword>Starke County</keyword>
<keyword>Tippecanoe County</keyword>
<keyword>Spencer County</keyword>
<keyword>Indiana</keyword>
<keyword>Porter County</keyword>
<keyword>Benton County</keyword>
<keyword>Putnam County</keyword>
<keyword>Posey County</keyword>
<keyword>Montgomery County</keyword>
<keyword>Digital Flood Insurance Rate Map</keyword>
<keyword>Kosciusko County</keyword>
<keyword>Jay County</keyword>
<keyword>Carroll County</keyword>
<keyword>Wabash County</keyword>
<keyword>FEMA Flood Hazard Zone</keyword>
<keyword>Elkhart County</keyword>
<keyword>Grant County</keyword>
<keyword>Madison County</keyword>
<keyword>Clark County</keyword>
<keyword>Jasper County</keyword>
<keyword>Floyd County</keyword>
<keyword>Clinton County</keyword>
<keyword>Morgan County</keyword>
<keyword>Dubois County</keyword>
<keyword>Bartholomew County</keyword>
<keyword>Howard County</keyword>
<keyword>Parke County</keyword>
<keyword>Noble County</keyword>
<keyword>Decatur County</keyword>
<keyword>NFIP</keyword>
<keyword>Dearborn County</keyword>
<keyword>Fulton County</keyword>
<keyword>Washington County</keyword>
<keyword>Marshall County</keyword>
<keyword>Special Flood Hazard Area</keyword>
<keyword>Owen County</keyword>
<keyword>Warren County</keyword>
<keyword>Pulaski County</keyword>
<keyword>Pike County</keyword>
<keyword>Blackford County</keyword>
<keyword>LaPorte County</keyword>
<keyword>Wayne County</keyword>
<keyword>Warrick County</keyword>
<keyword>CBRS</keyword>
<keyword>Jennings County</keyword>
<keyword>Flood Insurance Rate Map</keyword>
<keyword>Sullivan County</keyword>
<keyword>Scott County</keyword>
<keyword>Riverine Flooding</keyword>
<keyword>Jefferson County</keyword>
<keyword>Switzerland County</keyword>
<keyword>Clay County</keyword>
<keyword>inlandWaters</keyword>
<keyword>Hendricks County</keyword>
<keyword>Shelby County</keyword>
<keyword>Boone County</keyword>
<keyword>White County</keyword>
<keyword>Martin County</keyword>
<keyword>Cass County</keyword>
<keyword>Fayette County</keyword>
<keyword>Huntington County</keyword>
<keyword>Tipton County</keyword>
<keyword>Vigo County</keyword>
<keyword>Harrison County</keyword>
<keyword>DFIRM</keyword>
<keyword>Coastal Barrier Resources System</keyword>
<keyword>Whitley County</keyword>
<keyword>Newton County</keyword>
<keyword>Brown County</keyword>
<keyword>Rush County</keyword>
<keyword>Gibson County</keyword>
<keyword>Miami County</keyword>
<keyword>Ripley County</keyword>
<keyword>Jackson County</keyword>
<keyword>USA</keyword>
<keyword>Steuben County</keyword>
<keyword>Henry County</keyword>
<keyword>Wells County</keyword>
<keyword>LaGrange County</keyword>
<keyword>Lawrence County</keyword>
<keyword>Adams County</keyword>
<keyword>SFHA</keyword>
<keyword>Hancock County</keyword>
<keyword>Randolph County</keyword>
<keyword>Greene County</keyword>
<keyword>Ohio County</keyword>
<keyword>Vermillion County</keyword>
<keyword>Delaware County</keyword>
<keyword>Coastal Flooding</keyword>
<keyword>Daviess County</keyword>
<keyword>Crawford County</keyword>
<keyword>Fountain County</keyword>
<keyword>Union County</keyword>
<keyword>Knox County</keyword>
<keyword>Perry County</keyword>
<keyword>Floodway</keyword>
<keyword>DFIRM Database</keyword>
<keyword>Franklin County</keyword>
</searchKeys>
<resConst>
<LegConsts>
<useLimit>No warranty expressed or implied is made by Indiana Department of Natural Resources regarding the utility of the data on any other system nor shall the act of distribution constitute any such warranty.</useLimit>
<othConsts>This file is available to anyone, subject to written request.</othConsts>
</LegConsts>
</resConst>
<resConst>
<Consts>
<useLimit>&lt;DIV STYLE="text-align:Left;"&gt;&lt;DIV&gt;&lt;DIV&gt;&lt;P&gt;&lt;SPAN&gt;This data is not to be used for commercial profit. Acknowledgement of the Indiana Department of Natural Resources (IDNR) as the source of the digital data must be cited on any graphic reproduction of the data. The hardcopy FIRM and DFIRM and the accompanying FISs are the official designation of SFHAs and Base Flood Elevations (BFEs) for the NFIP. For the purposes of the NFIP, changes to the flood risk information published by FEMA may only be performed by FEMA and through the mechanisms established in the NFIP regulations (44 CFR Parts 59-78). These digital data are produced in conjunction with the hardcopy FIRMs and generally match the hardcopy map exactly. However the hardcopy flood maps and flood profiles are the authoritative documents for the NFIP. Acknowledgement of FEMA would be appreciated in products derived from these data. DATA DISCLAIMER The Department of Natural Resources provides these geographic data "as is" and the user accepts the data "as is", and assumes all risks associated with its use. The State believes the data to be accurate, but cannot and does not warranty it to be so. The State further makes no warranties, either expressed or implied as to any other matter whatsoever, including, without limitation, the condition of any product, or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user. Although these data have been processed successfully using the data processing technology of the State, no warranty, expressed or implied, is made by the State regarding any capability to use these data on any other system, nor does the fact of distribution constitute or imply any such warranty. In no event shall the State have any liability whatsoever for payment of any consequential, incidental, indirect, special, or tort damages of any kind, including, but not limited to, any loss of profits arising out of or reliance on the geographic data or arising out of the delivery, installation, operation, or support by the State.&lt;/SPAN&gt;&lt;/P&gt;&lt;/DIV&gt;&lt;/DIV&gt;&lt;/DIV&gt;</useLimit>
</Consts>
</resConst>
<aggrInfo>
<aggrDSName>
<citRespParty>
<rpOrgName>Federal Emergency Management Agency</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<presForm>
<PresFormCd value="005"/>
</presForm>
<presForm>
<fgdcGeoform>raster digital data</fgdcGeoform>
</presForm>
</aggrDSName>
<assocType>
<AscTypeCd value="001"/>
</assocType>
</aggrInfo>
<dataLang>
<languageCode value="eng"/>
<countryCode Sync="TRUE" value="USA"/>
</dataLang>
<dataExt>
<exDesc>publication date</exDesc>
<tempEle>
<TempExtent>
<exTemp>
<TM_Instant>
<tmPosition>2009-09-25</tmPosition>
</TM_Instant>
</exTemp>
</TempExtent>
</tempEle>
</dataExt>
<envirDesc Sync="FALSE">Esri ArcGIS 12.9.0.32739</envirDesc>
<spatRpType>
<SpatRepTypCd Sync="TRUE" value="001"/>
</spatRpType>
<dataExt>
<geoEle>
<GeoBndBox esriExtentType="search">
<exTypeCode Sync="TRUE">1</exTypeCode>
<westBL Sync="TRUE">-88.160656</westBL>
<eastBL Sync="TRUE">-84.688201</eastBL>
<northBL Sync="TRUE">41.781178</northBL>
<southBL Sync="TRUE">37.755410</southBL>
</GeoBndBox>
</geoEle>
</dataExt>
<idCredit>Indiana Department of Natural Resources, Division of Water</idCredit>
<tpCat>
<TopicCatCd value="012"/>
</tpCat>
</dataIdInfo>
<dqInfo>
<dqScope>
<scpLvl>
<ScopeCd value="005"/>
</scpLvl>
</dqScope>
<report type="DQConcConsis">
<measDesc>When FEMA revises an FIS, adjacent studies are checked to ensure agreement between flood elevations at the boundaries. Likewise flood elevations at the confluence of streams studied independently are checked to ensure agreement at the confluence. The FIRM and the FIS are developed together and care is taken to ensure that the elevations and other features shown on the flood profiles in the FIS agree with the information shown on the FIRM. However, the elevations as shown on the FIRM are rounded whole-foot elevations. They must be shown so that a profile recreated from the elevations on the FIRM will match the FIS profiles within one half of one foot.</measDesc>
</report>
<report type="DQCompOm">
<measDesc>Data contained in the DFIRM Database files reflect the content of the source materials. Features may have been eliminated or generalized on the source graphic, due to scale and legibility constraints. With new mapping, FEMA plans to maintain full detail in the spatial data it produces. However, older information is often transferred from existing maps where some generalization has taken place. Flood risk data are developed for communities participating in the NFIP for use in insurance rating and for floodplain management. Flood hazard areas are determined using statistical analyses of records of river flow, storm tides, and rainfall; information obtained through consultation with the communities; floodplain topographic surveys; and hydrological and hydraulic analysis. Both detailed and approximate analyses are employed. Generally, detailed analyses are used to generate flood risk data only for developed or developing areas of communities. For areas where little or no development is expected to occur, FEMA uses approximate analyses to generate flood risk data. Typically, only drainage areas that are greater than one square mile are studied.</measDesc>
</report>
<report type="DQQuanAttAcc">
<measDesc>The DFIRM Database consists of countywide vector files and associated attributes produced in conjunction with the hard copy FEMAFIRM. The published effective FIRM and DFIRM maps are issued as the official designation of the SFHAs. As such they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Attribute accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed. To obtain more detailed information in areas where Base Flood Elevations (BFEs) and/or floodways have been determined, users are encouraged to consult the Flood Profiles and Floodway Data and/or Summary of Stillwater Elevations tables contained within the FIS report that accompanies this DFIRM database. Users should be aware that BFEs shown in the S_BFE table represent rounded whole-foot elevations. These BFEs are intended for flood insurance rating purposes only and should not be used as the sole source of flood elevation information. Accordingly, flood elevation data presented in the FIS report must be used in conjunction with the FIRM for purposes of construction and/or floodplain management. The 1-percent-annual-chance water-surface elevations shown in the S_XS table match the regulatory elevations shown in the FIS report.</measDesc>
</report>
<report dimension="horizontal" type="DQAbsExtPosAcc">
<measDesc>The DFIRM Database consists of countywide vector files and associated attributes produced in conjunction with the hardcopy FEMA FIRM. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Horizontal accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed.</measDesc>
</report>
<report dimension="vertical" type="DQAbsExtPosAcc">
<measDesc>The DFIRM Database consists of countywide vector files and associated attributes produced in conjunction with the hardcopy FEMA FIRM. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Hazard Mapping Partners. Horizontal accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed.</measDesc>
</report>
<dataLineage>
<prcStep>
<stepDesc>PEN Products digitized data from FEMA maps to create various shapefiles, including S_Fld_Haz_Ar.shp for each of the counties included. These shapefiles were appended into a single, state-wide (of the counties included) shapefile.</stepDesc>
</prcStep>
<dataSource>
<srcDesc>Spatial and attribute information, floodplain widths, BFEs, Cross Sections, floodplain location.</srcDesc>
<srcCitatn>
<resTitle>Flood Insurance Rate Maps, xx County, Indiana, USA</resTitle>
<resAltTitle>FIRM_BAR_IN</resAltTitle>
<citRespParty>
<rpOrgName>Federal Emergency Management Agency</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<citRespParty>
<rpOrgName>Federal Emergency Management Agency</rpOrgName>
<rpCntInfo>
<cntAddress>
<delPoint>Washington, DC</delPoint>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="010"/>
</role>
</citRespParty>
<presForm>
<fgdcGeoform>maps</fgdcGeoform>
</presForm>
</srcCitatn>
</dataSource>
<dataSource>
<srcDesc>ll line work and attribute information.</srcDesc>
<srcCitatn>
<resTitle>LANDSURVEY_SECTIONS_POLY_IN: Land Survey Lines of Indiana (Indiana Geological Survey, 1:24,000, Polygon Shapefile) Edition: 1.0 (PLSS)</resTitle>
<resAltTitle>IGS</resAltTitle>
<date>
<pubDate>2002-06-21</pubDate>
</date>
<citRespParty>
<rpOrgName>Indiana Geological Survey</rpOrgName>
<rpCntInfo>
<cntAddress>
<delPoint>Bloomington, Indiana</delPoint>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="010"/>
</role>
</citRespParty>
<citRespParty>
<rpOrgName>Indiana Geological Survey</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<presForm>
<PresFormCd value="006"/>
</presForm>
<presForm>
<fgdcGeoform>map</fgdcGeoform>
</presForm>
</srcCitatn>
</dataSource>
<dataSource>
<srcDesc>All line work and attribute information.</srcDesc>
<srcCitatn>
<resTitle>National Hydrography Dataset (NHD) - High-resolution</resTitle>
<resAltTitle>NHD 24K</resAltTitle>
<citRespParty>
<rpOrgName>U.S. Geological Survey</rpOrgName>
<rpCntInfo>
<cntAddress>
<delPoint>Reston, Virginia</delPoint>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="010"/>
</role>
</citRespParty>
<citRespParty>
<rpOrgName>U.S. Geological Survey in cooperation with U.S. Environmental Protection Agency, USDA Forest Service, and other Federal, State and local partners</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<presForm>
<PresFormCd value="005"/>
</presForm>
<presForm>
<fgdcGeoform>vector digital data</fgdcGeoform>
</presForm>
</srcCitatn>
</dataSource>
<dataSource>
<srcDesc>All line work and attribute information.</srcDesc>
<srcCitatn>
<resTitle>National Hydrography Dataset (NHD) - Medium-resolution</resTitle>
<resAltTitle>DLG 24K</resAltTitle>
<date>
<pubDate>1999-01-01</pubDate>
</date>
<citRespParty>
<rpOrgName>U.S. Geological Survey</rpOrgName>
<rpCntInfo>
<cntAddress>
<delPoint>Reston, Virginia</delPoint>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="010"/>
</role>
</citRespParty>
<citRespParty>
<rpOrgName>U.S. Geological Survey in cooperation with the U.S. Environmental Protection Agency</rpOrgName>
<role>
<RoleCd value="006"/>
</role>
</citRespParty>
<presForm>
<PresFormCd value="005"/>
</presForm>
<presForm>
<fgdcGeoform>vector digital data</fgdcGeoform>
</presForm>
</srcCitatn>
</dataSource>
<prcStep>
<stepDesc>Updates made.</stepDesc>
<stepDateTm>2008-04-11</stepDateTm>
<stepProc>
<rpIndName>Robert N. Wilkinson</rpIndName>
<rpOrgName>Indiana Department of Natural Resources Division of Water</rpOrgName>
<rpPosName>Division GIS Coordinator</rpPosName>
<rpCntInfo>
<cntPhone>
<voiceNum>317-234-1094</voiceNum>
</cntPhone>
<cntAddress>
<eMailAdd>rnwilkinson@dnr.in.gov</eMailAdd>
</cntAddress>
</rpCntInfo>
<role>
<RoleCd value="009"/>
</role>
</stepProc>
</prcStep>
</dataLineage>
</dqInfo>
<eainfo>
<detailed Name="FloodSwitz_Floodway">
<enttyp>
<enttypl Sync="FALSE">FloodSwitz_Floodway</enttypl>
<enttypt Sync="TRUE">Feature Class</enttypt>
<enttypc Sync="TRUE">0</enttypc>
</enttyp>
<attr>
<attrlabl>SFHA_TF</attrlabl>
<attalias Sync="TRUE">SFHA_TF</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">1</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>FLD_ZONE</attrlabl>
<attrdef>Flood Zone determination</attrdef>
<attrdefs>For flood insurance rating purposes, flood insurance zone designations are assigned to a community based on the results of the engineering analyses.</attrdefs>
<attrdomv>
<edom>
<edomv>ah</edomv>
<edomvd>Zone AH is the flood insurance risk zone that corresponds to the areas of 1-percent-annual-chance shallow flooding (usually areas of ponding) where average depths are between 1 and 3 feet. Whole-foot BFEs derived from the detailed hydraulic analyses are shown at selected intervals within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>a</edomv>
<edomvd>Zone A is the flood insurance risk zone that corresponds to the 1-percent-annual-chance floodplains that are determined in the FIS by approximate methods. Because detailed hydraulic analyses are not performed for such areas, no BFEs or base flood depths are shown within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>x</edomv>
<edomvd>Zone X is the flood insurance risk zone that corresponds to areas outside the 0.2-percent-annual-chance floodplain, areas within the 0.2-percent-annual-chance floodplain, areas of 1-percent-annual-chance flooding where average depths are less than 1 foot, areas of 1-percent-annual-chance flooding where the contributing drainage area is less than 1 square mile, and areas protected from the 1-percent-annual-chance flood by levees. No BFEs or base flood depths are shown within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>ao</edomv>
<edomvd>Zone AO is the flood insurance risk zone that corresponds to the areas of 1-percent-annual-chance shallow flooding (usually sheet flow on sloping terrain) where average depths are between 1 and 3 feet. Average whole-foot base flood depths derived from the detailed hydraulic analyses are shown within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>ae</edomv>
<edomvd>Zone AE is the flood insurance risk zone that corresponds to the 1-percent-annual-chance floodplains that are determined in the FIS by detailed methods. In most instances, whole-foot BFEs derived from the detailed hydraulic analyses are shown at selected intervals within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>0.2 PCT ANNUAL CHANCE FLOOD HAZARD</edomv>
<edomvd>500-year flood zone/an area of 0.2% annual chance flooding</edomvd>
</edom>
<edom>
<edomv>ar</edomv>
<edomvd>Zone AR is the flood insurance risk zone that corresponds to an area of special flood hazard formerly protected from the 1-percent-annual-chance flood event by a flood-control system that was subsequently decertified. Zone AR indicates that the former flood-control system is being restored to provide protection from the 1-percent-annual-chance or greater flood event.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>x (Future Base Flood)</edomv>
<edomvd>Zone X (Future Base Flood) is the flood insurance risk zone that corresponds to the 1-percent-annual-chance floodplains that are determined based on future-conditions hydrology. No BFEs or base flood depths are shown within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>d</edomv>
<edomvd>Zone D is the flood insurance risk zone that corresponds to unstudied areas where flood hazards are undetermined, but possible.</edomvd>
<edomvds>FIS</edomvds>
</edom>
<edom>
<edomv>a99</edomv>
<edomvd>Zone A99 is the flood insurance risk zone that corresponds to areas of the 1-percent-annual-chance floodplain that will be protected by a Federal flood protection system where construction has reached specified statutory milestones. No BFEs or depths are shown within this zone.</edomvd>
<edomvds>FIS</edomvds>
</edom>
</attrdomv>
<attalias Sync="TRUE">DFIRM_ID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">6</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">VERSION_ID</attrlabl>
<attalias Sync="TRUE">VERSION_ID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">11</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>BFE_REVERT</attrlabl>
<attrdef>Internal feature number.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
<attalias Sync="TRUE">BFE_REVERT</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">STUDY_TYP</attrlabl>
<attalias Sync="TRUE">STUDY_TYP</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">28</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>V_DATUM</attrlabl>
<attalias Sync="TRUE">V_DATUM</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">17</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">ZONE_SUBTY</attrlabl>
<attalias Sync="TRUE">ZONE_SUBTY</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">57</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>VELOCITY</attrlabl>
<attalias Sync="TRUE">VELOCITY</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl>VEL_UNIT</attrlabl>
<attalias Sync="TRUE">VEL_UNIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">20</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>AR_REVERT</attrlabl>
<attalias Sync="TRUE">AR_REVERT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">17</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Internal feature number.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>OBJECTID</attrlabl>
<attrdef>Internal feature number.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Sequential unique whole numbers that are automatically generated.</udom>
</attrdomv>
<attalias Sync="TRUE">OBJECTID</attalias>
<attrtype Sync="TRUE">OID</attrtype>
<attwidth Sync="TRUE">4</attwidth>
<atprecis Sync="TRUE">10</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>SOURCE_CIT</attrlabl>
<attalias Sync="TRUE">SOURCE_CIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">21</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>SHAPE</attrlabl>
<attrdef>Feature geometry.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Coordinates defining the features.</udom>
</attrdomv>
<attalias Sync="TRUE">DEP_REVERT</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl>DEP_REVERT</attrlabl>
<attalias Sync="TRUE">AR_SUBTRV</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">57</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">AR_SUBTRV</attrlabl>
<attalias Sync="TRUE">STATIC_BFE</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl>STATIC_BFE</attrlabl>
<attalias Sync="TRUE">DEPTH</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">38</atprecis>
<attscale Sync="TRUE">8</attscale>
</attr>
<attr>
<attrlabl>DEPTH</attrlabl>
<attalias Sync="TRUE">DUAL_ZONE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">1</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">DUAL_ZONE</attrlabl>
<attalias Sync="TRUE">LEN_UNIT</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">16</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>LEN_UNIT</attrlabl>
<attalias Sync="TRUE">SOURCE_DNR</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">10</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl Sync="TRUE">SOURCE_DNR</attrlabl>
<attalias Sync="TRUE">Shape</attalias>
<attrtype Sync="TRUE">Geometry</attrtype>
<attwidth Sync="TRUE">8</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
<attrdef Sync="TRUE">Feature geometry.</attrdef>
<attrdefs Sync="TRUE">Esri</attrdefs>
<attrdomv>
<udom Sync="TRUE">Coordinates defining the features.</udom>
</attrdomv>
</attr>
<attr>
<attrlabl>Shape</attrlabl>
<attrdef>Feature geometry.</attrdef>
<attrdefs>ESRI</attrdefs>
<attrdomv>
<udom>Coordinates defining the features.</udom>
</attrdomv>
<attalias Sync="TRUE">FLD_AR_ID</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">32</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl>FLD_AR_ID</attrlabl>
<attalias Sync="TRUE">FLD_ZONE</attalias>
<attrtype Sync="TRUE">String</attrtype>
<attwidth Sync="TRUE">17</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.STArea()</attrlabl>
<attalias Sync="TRUE">Shape.STArea()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
<attr>
<attrlabl Sync="TRUE">Shape.STLength()</attrlabl>
<attalias Sync="TRUE">Shape.STLength()</attalias>
<attrtype Sync="TRUE">Double</attrtype>
<attwidth Sync="TRUE">0</attwidth>
<atprecis Sync="TRUE">0</atprecis>
<attscale Sync="TRUE">0</attscale>
</attr>
</detailed>
<overview>
<eaover>The DFIRM Database is made up of several data themes containing both spatial and attribute information. These data together represent the current flood risk for the subject area as identified by FEMA. The attribute tables include SFHA locations, flood zone designations, BFEs, political entities, cross-section locations, FIRM panel information, and other data related to the NFIP. Entity_and_Attribute_Detail_Citation: Appendix L of FEMA's Guidelines and Specifications for FEMA Flood Hazard Mapping Partners contains a detailed description of each attribute code and a reference to other relevant information.</eaover>
</overview>
</eainfo>
<mdHrLvName Sync="TRUE">dataset</mdHrLvName>
<refSysInfo>
<RefSystem>
<refSysID>
<identCode Sync="TRUE" code="26916"/>
<idCodeSpace Sync="TRUE">EPSG</idCodeSpace>
<idVersion Sync="TRUE">6.11(3.0.1)</idVersion>
</refSysID>
</RefSystem>
</refSysInfo>
<spatRepInfo>
<VectSpatRep>
<geometObjs Name="FloodSwitz_Floodway">
<geoObjTyp>
<GeoObjTypCd Sync="TRUE" value="002"/>
</geoObjTyp>
<geoObjCnt Sync="TRUE">0</geoObjCnt>
</geometObjs>
<topLvl>
<TopoLevCd Sync="TRUE" value="001"/>
</topLvl>
</VectSpatRep>
</spatRepInfo>
<spdoinfo>
<ptvctinf>
<esriterm Name="FloodSwitz_Floodway">
<efeatyp Sync="TRUE">Simple</efeatyp>
<efeageom Sync="TRUE" code="4"/>
<esritopo Sync="TRUE">FALSE</esritopo>
<efeacnt Sync="TRUE">0</efeacnt>
<spindex Sync="TRUE">TRUE</spindex>
<linrefer Sync="TRUE">FALSE</linrefer>
</esriterm>
</ptvctinf>
</spdoinfo>
<mdDateSt Sync="TRUE">20221027</mdDateSt>
</metadata>
